DF16 extractor 150m3/h / 350m3/h | Secret Garden
110,00€ - 140,00€ VAT included
The new Secret Jardin Extractor DF16 with smart click function can be mounted on the DuctingFlange system in a matter of seconds and without the need for additional tools. It is intended to be used in combination with SecretJardin CTC80 activated carbon filters.
- Description
- Additional Information
- Institutional
Description
The new Secret Jardin Extractor DF16 with smart click function can be mounted on the DuctingFlange system in a matter of seconds and without the need for additional tools. It is intended to be used in combination with SecretJardin CTC80 activated carbon filters. However, the EC fan can also be connected to other standard filters using a duct flange connector and corresponding rubber ducts (see image, for example). The fan is equipped with a temperature control function and two heat sensors (indoor or outdoor), depending on the size of your grow box (see image). A high quality EC motor (24V-40W) has also been installed. The casing was made of fireproof polyamide, reinforced with fiberglass (PA66 + 15% GF V0).
Table of Contents
DF16 Extractor T° 50/100/150 m3/h
Regulator adjustment:
- Select the desired set temperature (TEMP°). The EC fan regulates the temperature with a deviation of +/- 2°C.
- determine the minimum exhaust air velocity (EXT. MIN). So that the air can escape even at low temperatures.
- determine the maximum velocity of the exhaust air (EXT. MAX). Depending on the cultivation surface (see technical data).
Integrated and external temperature sensor
When the 2nd thermal sensor (external) is connected, the integrated sensor is disconnected. Thus, if the integrated temperature sensor is used, the EC fan operates at a minimum speed of 5%.
Volume test:
The measurement was made 70 cm in front of the tent without a silencer.
- maximum phase 50m3/h: 20 dB
- maximum phase 100m3/h: 40 dB
- maximum phase 150m3/h: 55 dB
Recommendation:
- Power level 50m3/h for a grow tent of up to 60x40x60cm, recommended carbon filter DF16100.
- Power level 100m3/h for a grow tent of up to 90x60x98cm, recommended carbon filter DF16100.
- Power level 150m3/h for a grow tent of up to 60x60x160cm, recommended carbon filter DF16150.
Details at a glance:
- Compatible with all Secret Jardin grow tents.
- 3-stage EC fan with capacity of 50/100/150 m3/h
- Temperature control function and 2 heat sensors (integrated and external)
- Tool-free assembly in seconds
- Possibility of connection to different flange sizes
Technical data:
- 3 stages: 50/100/150 m3/h output
- Consumption: 15W
- Current: 0,6A
- Voltage: 110-220 V
- Frequency: 50 / 60 Hz
- Ambient temperature: min. 0°C/max. 40°C
- Dimensions (LxWxH): 22x18x10cm
- Protection class: IP54
- Power cord length: 60cm
- Second sensor cable length: 240 cm
- Weight: 0,8kg
DF16 Extractor T° 150/250/350 m3/h
Regulator adjustment:
- Select the desired set temperature (TEMP°). The EC fan regulates the temperature with a deviation of +/- 2°C.
- determine the minimum exhaust air velocity (EXT. MIN). So that the air can escape even at low temperatures.
- determine the maximum velocity of the exhaust air (EXT. MAX). Depending on the cultivation surface (see technical data).
Integrated and external temperature sensor
When the 2nd thermal sensor (external) is connected, the integrated sensor is disconnected. Thus, if the integrated temperature sensor is used, the EC fan operates at a minimum speed of 5%.
Volume test:
The measurement was made 70 cm in front of the tent without a silencer.
- maximum phase 150m3/h: 36 dB
- maximum phase 250m3/h: 54 dB
- maximum phase 350m3/h: 61 dB
Recommendation:
- Power level 150m3/h for a grow tent of up to 60x60x160cm, recommended carbon filter DF16150.
- Power level 250m3/h for a grow tent of up to 100x100x200cm, recommended carbon filter DF16250.
- Power level 350m3/h for a grow tent of up to 120x120x200cm, recommended carbon filter DF16350.
Details at a glance:
- Compatible with all Secret Jardin grow tents.
- 3-stage EC fan with capacity of 150/250/350 m3/h
- Temperature control function and 2 heat sensors (integrated and external)
- Tool-free assembly in seconds
- Possibility of connection to different flange sizes
Technical data:
- 3 stages: 150/250/350 m3/h output
- Consumption: 35W
- Current: 1,5A
- Voltage: 110-220 V
- Frequency: 50 / 60 Hz
- Ambient temperature: min. 0°C/max. 40°C
- Dimensions (LxWxH): 25x25x21cm
- Protection class: IP54
- Power cord length: 60cm
- Second sensor cable length: 240 cm
- Weight: 1,5kg
