Description

purolyte It is a disinfectant for plants, tools, and grow cabinets. It can eliminate fungi and bacteria from water, air, and any surface.

It contains no chemicals and can be used on already ripe buds, ungerminated seeds, greenhouses with unrooted cuttings... even on human skin.

Purolyt is an anti-liquidmushrooms novel that is achieved through a chemical electrolysis system.

The contents are nothing more than hydrogen peroxide, salt and electricity.

It seems simple, but Purolyt's trick lies in its patent, which allows positive ions to remain inside the bottle for more than two years.

This way, the effectiveness is preserved and it is no longer necessary to carry out electrolysis just before applying it to disinfect (a process that only a few could afford).

How does Purolyt electrolysis disinfection work?

It is a process similar to that performed by the human body's immune system to fight bacteria and viruses.

White blood cells produce hypochlorous acid to fight them, and this is the same acid that Purolyt produces when it comes into contact with air.

Hypochlorous acid is extremely effective in combating: E-coli, Salmonella, Pythium, Botrytis, Mildew and Oidium, among others.

How Purolyt can be applied in horticulture

• Disinfect plants, cuttings and buds. Purolyt can be applied directly to the leaves, buds, cuttings and seedlings as many times as desired, there is no contraindication. An application at a rate of 5ml per liter a couple of times a week is enough to keep plants free of OIDIO, Botritys, Rust or any other fungus.
• Disinfect water to germinate marijuana seeds. Purolyt is more effective than hydrogen peroxide. To prepare the sprouting water, put a couple of ml of Purolyt in 1 liter of weakly mineralized water and immerse the seeds in this mixture for a minimum of 8 hours. Then continue with the chosen germination method.
• Disinfect the inert substrate before reusing it. The substrate must be watered with a solution of 10 ml per liter of water.
• Disinfection of the closet or grow room. Place 10ml of Purolyt disinfectant for each liter of water in a sprayer and spray walls, ceiling, floor and recesses.
• Disinfect hands and/or gardening tools. Important for cuttings producers. Simply dilute 5ml for every 1 liter of water and immerse the material you wish to disinfect for one or two minutes.

Purolyt application mode

The disinfectant concentrate, Purolyt, can be used diluted as a spray, mist, wipe or dip, as necessary. For water disinfection, the disinfectant concentrate, Purolyt, can be added to the water directly. For more information, please read the instruction manual.

• RUBBING – This method is primarily used to disinfect surfaces. We recommend spraying surfaces evenly and then wiping with the product. It is important to ensure that the surfaces to be disinfected are completely covered. Pay attention to the performance time.
• SPRAYING – This method is useful for all those places that disinfection by wiping does not reach, that is, surfaces that are difficult to access. A conventional pressure sprayer can be used for spraying. It is important to ensure that the surfaces to be disinfected are completely covered.
• NEBULIZATION – Nebulization provides uniform droplet size and therefore optimal aerosol distribution. This method is especially suitable for disinfecting ambient air in large rooms. It is important to ensure that the surfaces to be disinfected are completely covered.
• IMMERSION – Parts with complicated geometric shapes and cavities can be easily immersed in a dilute Purolyt solution. Pipes and rubber can be rinsed with Purolyt solution. Pay attention to the performance time.
• DIRECT ADDITION – For the disinfection of wastewater, dosed Purolyt can be added directly to the water to be disinfected.

Instructions for use of Purolyt

• Air disinfection by spraying or nebulization (for example, in rooms, cars, greenhouses, or propagators) OR,
  • Prepare a 1:50 dilution (20 ml of disinfectant concentrate per liter of water). Commercially available pressure sprayers are suitable for spraying.
  • Note: Purified water (e.g. distilled water, demineralized water or water purified by reverse osmosis) should always be used for spraying and misting.
  • Cold misting achieves ideal distribution, especially for disinfecting ambient air.
• Surface disinfection (e.g. walls, work equipment, tools, gardening utensils, pipes, hoses and system components)
  • Prepare a 1:50 dilution (20 ml of disinfectant concentrate per liter of water).
  • You can spray the mixture onto surfaces or mist it into the room. Parts with complex geometries and cavities can simply be immersed in the solution.
  • Tubes and hoses can also be easily washed with the solution
    Note: Surfaces to be disinfected must be cleaned first (mechanically). Ensure that the surfaces are completely moistened.
  • Leave on for 3 to 6 minutes, depending on the degree of dirt.
• Disinfection of water and other liquids l (for example, in water tanks, aquifer systems or air conditioners)
  • For preventative use, add 5 to 10 ml of disinfectant concentrate per 10 liters of water directly to the water/liquid to be disinfected.
  • To treat existing contamination, add 20 to 40 ml of Purolyt per 10 liters of water directly to the water/liquid to be disinfected.
  • Note: At water temperatures below 23*C (74*F), apply once a week at the lowest rate.
  • At water temperatures above 23*C (74*F), apply twice weekly at the higher rate.
  • We strongly recommend preventive use. If using organic fertilizers, enzymes, or microorganisms in hydroponic or aeroponic systems, it is advisable to observe a two-hour waiting period after disinfecting the water.
• Disinfection of inert substrates (Recycling)
  • Prepare a 1:100 dilution (10 ml of disinfectant concentrate per liter of water).
  • Note: Soak the substrate completely and let it sit for 24 hours. Suitable for all types of inert substrates.

What advantages does Purolyt plant disinfectant have?

• It is a fungicide that is completely safe for plants and animals (including people).
• It doesn't cause any reaction on the skin, eyes, or mucous membranes. In fact, it can be used to treat skin fungus.
• Does not leave residue. The active components are water, salt and electricity that will disappear as they evaporate a few hours after application.
• Fungi, bacteria and microorganisms do not develop resistance to Purolyt. It doesn't matter if we apply it constantly for years, it will always be equally effective.
• It is the only disinfectant that does not contain chemical additives such as phosphates or alcohols.

Composition of Purolyt

Purolyt uses an active ingredient similar to that of the human body to fight bacteria and viruses: When the immune system detects a virus, white blood cells are activated to produce hypochlorous acid (HOCL), which is also the active ingredient in Purolyt.

It is scientifically confirmed that HOCL has extremely effective disinfectant properties.

• Distilled water: 99%
• Active chlorine produced by electrolysis: 0.07%
• Product suitable for home gardening.
• It does not leave questionable residues, since the active components react again to water and traces of minerals.
• No resistance to microorganisms develops thanks to Purolyt's actuation mechanism.
• Without chemical additives such as surfactants, phosphates, alcohols, formaldehyde, silver ions, perfumes or dyes.

Download Instructions for use Purolyt (PDF)

Download Purolyt Brochure (PDF)

Download Purolyt Hygiene Management (PDF)

www.purolyt.com